Hardware

Mikrokontroller STM32F407IG

  • Core

    • ARM 32-bit Cortex-M4 CPU with FPU

    • Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory

    • frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz, (Dhrystone 2.1), and DSP instructions

  • Memories

    • Up to 1 Mbyte of Flash memory

    • Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM

    • Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories

  • LCD parallel interface, 8080/6800 modes

  • Clock, reset and supply management

    • 1.8 V to 3.6 V application supply and I/Os

    • POR, PDR, PVD and BOR

    • 4-to-26 MHz crystal oscillator

    • Internal 16 MHz factory-trimmed RC (1% accuracy)

    • 32 kHz oscillator for RTC with calibration

    • Internal 32 kHz RC with calibration

    • Sleep, Stop and Standby modes

    • VBATsupply for RTC, 20x 32 bit backup registers + optional 4 KB backup SRAM

  • 3x 12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode

  • 2x 12-bit D/A converters

  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

  • Debug mode

    • Serial wire debug (SWD) & JTAG interfaces

    • Cortex-M4 Embedded Trace Macrocell#

  • Up to 140 I/O ports with interrupt capability

    • Up to 136 fast I/Os up to 84 MHz

    • Up to 138 5 V-tolerant I/Os

  • Up to 15 communication interfaces

    • Up to 3 I2C interfaces (SMBus/PMBus)

    • Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)

    • Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock

    • 2 CAN interfaces (2.0B Active)

    • SDIO interface

  • Advanced connectivity

    • USB 2.0 full-speed device/host/OTG controller with on-chip PHY

    • USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

    • 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  • 8- to 14-bit parallel camera interface up to 54 Mbytes/s

  • True random number generator

  • CRC calculation unit

  • 96-bit unique ID

  • RTC: subsecond accuracy, hardware calendar

Basisboard

  • TFT 4’’ QVGA, Touch-Screen

  • Ethernet

  • CAN

  • 2x UART (1x ueber USB)

  • I2C

  • Audio I/O

  • SD Card

  • Steckbare kundenspezifische Erweiterungsmodule

  • USB / JTAG Debugger

Legal Information