Specific interface management functions

Specific interface management functions. More...

Collaboration diagram for Specific interface management functions:

Functions
void	TIM_EncoderInterfaceConfig (TIM_TypeDef *TIMx, uint16_t TIM_EncoderMode, uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
	Configures the TIMx Encoder Interface. More...
void	TIM_SelectHallSensor (TIM_TypeDef *TIMx, FunctionalState NewState)
	Enables or disables the TIMx's Hall sensor interface. More...

Detailed Description

Specific interface management functions.

 ===============================================================================
            ##### Specific interface management functions #####
 ===============================================================================  

Function Documentation

void TIM_EncoderInterfaceConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_EncoderMode,
		uint16_t	TIM_IC1Polarity,
		uint16_t	TIM_IC2Polarity
	)

Configures the TIMx Encoder Interface.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_EncoderMode	specifies the TIMx Encoder Mode. This parameter can be one of the following values: TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending on the level of the other input.
TIM_IC1Polarity	specifies the IC1 Polarity This parameter can be one of the following values: TIM_ICPolarity_Falling: IC Falling edge. TIM_ICPolarity_Rising: IC Rising edge.
TIM_IC2Polarity	specifies the IC2 Polarity This parameter can be one of the following values: TIM_ICPolarity_Falling: IC Falling edge. TIM_ICPolarity_Rising: IC Rising edge.

Return values

None

Definition at line 3070 of file stm32f4xx_tim.c.

void TIM_SelectHallSensor	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Enables or disables the TIMx's Hall sensor interface.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
NewState	new state of the TIMx Hall sensor interface. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 3122 of file stm32f4xx_tim.c.