|
CARME-M4 BSP
V1.5
|
| ▼ CARME | |
| ► inc | |
| can.h | Drivers for the CAN interface. Uses the SJA1000 CAN controller on the CARME motherboard |
| can_sja1000.h | SJA1000 specific declarations |
| carme.h | |
| carme_io1.h | CARME IO1 extension module board support package |
| carme_io2.h | CARME IO2 extension module board support package |
| cs42l51.h | CS42L51 codec support functions |
| eeprom.h | EEPROM board support package for the CARME module |
| i2c.h | I2C board support package for the CARME module |
| i2s.h | I2S board support package for the CARME-M4 module |
| lcd_conf.h | Simple graphic library configuration |
| rtc.h | RTC interface. Communication interface to use the RTC from the CARME-M4 |
| rtc_ext.h | Communication interface to use the RTC on the CARME mainboard |
| ssd1963.h | Driver for the SSD1963 Graphic-Controller |
| ssd1963_cmd.h | Driver for the SSD1963 Graphic-Controller |
| ssd1963_lld.h | Low level driver for the SSD1963 Graphic-Controller |
| stm32f4xx_conf.h | |
| uart.h | The CARME UART Module provides a function to initialize the GPIOs for the CARME UART ports |
| ► src | |
| assert.c | Print assert messages to the stdout. If stdout is a serial port, please initialize the port at startup |
| can.c | Drivers for the CAN interface. Uses the SJA1000 CAN controller on the CARME motherboard |
| carme.c | |
| carme_io1.c | CARME IO1 extension module board support package |
| carme_io2.c | CARME IO2 extension module board support package |
| cs42l51.c | CS42L51 codec support functions |
| eeprom.c | Write and read data to the onboard non volatile EEPROM |
| i2c.c | I2C board support package for the CARME module |
| i2s.c | I2S board support package for the CARME-M4 module |
| rtc.c | Communication interface to use the RTC on the controller |
| rtc_ext.c | Communication interface to use the RTC on the CARME mainboard |
| ssd1963.c | Driver for the SSD1963 Graphic-Controller |
| ssd1963_lld.c | Low level driver for the SSD1963 Graphic-Controller |
| system_stm32f4xx.c | |
| uart.c | The CARME UART Module provides a function to initialize the GPIOs for the CARME UART ports |
| ▼ FatFs | |
| ► doc | |
| ► img | |
| app1.c | |
| app2.c | |
| app3.c | |
| ► inc | |
| diskio.h | |
| ff.h | |
| ffconf.h | |
| integer.h | |
| stm32f4_sdio_sd.h | This file contains all the functions prototypes for the SD Card stm324xg_eval_sdio_sd driver firmware library |
| stm32f4_sdio_sd_lld.h | |
| ► src | |
| diskio.c | Low level disk I/O module skeleton for FatFs |
| ff.c | |
| stm32f4_sdio_sd.c | This file provides a set of functions needed to manage the SDIO SD Card memory mounted on STM32F4 Discovery board |
| stm32f4_sdio_sd_lld.c | |
| sync.c | FatFs synchronize functions. Add synchronize functions to the FatFs. This will add the reentrant feature to the module |
| ▼ StdPeriph_Driver | |
| ► inc | |
| misc.h | This file contains all the functions prototypes for the miscellaneous firmware library functions (add-on to CMSIS functions) |
| stm32f4xx_adc.h | This file contains all the functions prototypes for the ADC firmware library |
| stm32f4xx_can.h | This file contains all the functions prototypes for the CAN firmware library |
| stm32f4xx_crc.h | This file contains all the functions prototypes for the CRC firmware library |
| stm32f4xx_cryp.h | This file contains all the functions prototypes for the Cryptographic processor(CRYP) firmware library |
| stm32f4xx_dac.h | This file contains all the functions prototypes for the DAC firmware library |
| stm32f4xx_dbgmcu.h | This file contains all the functions prototypes for the DBGMCU firmware library |
| stm32f4xx_dcmi.h | This file contains all the functions prototypes for the DCMI firmware library |
| stm32f4xx_dma.h | This file contains all the functions prototypes for the DMA firmware library |
| stm32f4xx_exti.h | This file contains all the functions prototypes for the EXTI firmware library |
| stm32f4xx_flash.h | This file contains all the functions prototypes for the FLASH firmware library |
| stm32f4xx_fsmc.h | This file contains all the functions prototypes for the FSMC firmware library |
| stm32f4xx_gpio.h | This file contains all the functions prototypes for the GPIO firmware library |
| stm32f4xx_hash.h | This file contains all the functions prototypes for the HASH firmware library |
| stm32f4xx_i2c.h | This file contains all the functions prototypes for the I2C firmware library |
| stm32f4xx_iwdg.h | This file contains all the functions prototypes for the IWDG firmware library |
| stm32f4xx_pwr.h | This file contains all the functions prototypes for the PWR firmware library |
| stm32f4xx_rcc.h | This file contains all the functions prototypes for the RCC firmware library |
| stm32f4xx_rng.h | This file contains all the functions prototypes for the Random Number Generator(RNG) firmware library |
| stm32f4xx_rtc.h | This file contains all the functions prototypes for the RTC firmware library |
| stm32f4xx_sdio.h | This file contains all the functions prototypes for the SDIO firmware library |
| stm32f4xx_spi.h | This file contains all the functions prototypes for the SPI firmware library |
| stm32f4xx_syscfg.h | This file contains all the functions prototypes for the SYSCFG firmware library |
| stm32f4xx_tim.h | This file contains all the functions prototypes for the TIM firmware library |
| stm32f4xx_usart.h | This file contains all the functions prototypes for the USART firmware library |
| stm32f4xx_wwdg.h | This file contains all the functions prototypes for the WWDG firmware library |
| ► src | |
| misc.c | This file provides all the miscellaneous firmware functions (add-on to CMSIS functions) |
| stm32f4xx_adc.c | This file provides firmware functions to manage the following functionalities of the Analog to Digital Convertor (ADC) peripheral: |
| stm32f4xx_can.c | This file provides firmware functions to manage the following functionalities of the Controller area network (CAN) peripheral: |
| stm32f4xx_crc.c | This file provides all the CRC firmware functions |
| stm32f4xx_cryp.c | This file provides firmware functions to manage the following functionalities of the Cryptographic processor (CRYP) peripheral: |
| stm32f4xx_cryp_aes.c | This file provides high level functions to encrypt and decrypt an input message using AES in ECB/CBC/CTR/GCM/CCM modes. It uses the stm32f4xx_cryp.c/.h drivers to access the STM32F4xx CRYP peripheral. AES-ECB/CBC/CTR/GCM/CCM modes are available on STM32F437x Devices. For STM32F41xx Devices, only AES-ECB/CBC/CTR modes are available |
| stm32f4xx_cryp_des.c | This file provides high level functions to encrypt and decrypt an input message using DES in ECB/CBC modes. It uses the stm32f4xx_cryp.c/.h drivers to access the STM32F4xx CRYP peripheral |
| stm32f4xx_cryp_tdes.c | This file provides high level functions to encrypt and decrypt an input message using TDES in ECB/CBC modes . It uses the stm32f4xx_cryp.c/.h drivers to access the STM32F4xx CRYP peripheral |
| stm32f4xx_dac.c | This file provides firmware functions to manage the following functionalities of the Digital-to-Analog Converter (DAC) peripheral: |
| stm32f4xx_dbgmcu.c | This file provides all the DBGMCU firmware functions |
| stm32f4xx_dcmi.c | This file provides firmware functions to manage the following functionalities of the DCMI peripheral: |
| stm32f4xx_dma.c | This file provides firmware functions to manage the following functionalities of the Direct Memory Access controller (DMA): |
| stm32f4xx_exti.c | This file provides firmware functions to manage the following functionalities of the EXTI peripheral: |
| stm32f4xx_flash.c | This file provides firmware functions to manage the following functionalities of the FLASH peripheral: |
| stm32f4xx_fsmc.c | This file provides firmware functions to manage the following functionalities of the FSMC peripheral: |
| stm32f4xx_gpio.c | This file provides firmware functions to manage the following functionalities of the GPIO peripheral: |
| stm32f4xx_hash.c | This file provides firmware functions to manage the following functionalities of the HASH / HMAC Processor (HASH) peripheral: |
| stm32f4xx_hash_md5.c | This file provides high level functions to compute the HASH MD5 and HMAC MD5 Digest of an input message. It uses the stm32f4xx_hash.c/.h drivers to access the STM32F4xx HASH peripheral |
| stm32f4xx_hash_sha1.c | This file provides high level functions to compute the HASH SHA1 and HMAC SHA1 Digest of an input message. It uses the stm32f4xx_hash.c/.h drivers to access the STM32F4xx HASH peripheral |
| stm32f4xx_i2c.c | This file provides firmware functions to manage the following functionalities of the Inter-integrated circuit (I2C) |
| stm32f4xx_iwdg.c | This file provides firmware functions to manage the following functionalities of the Independent watchdog (IWDG) peripheral: |
| stm32f4xx_pwr.c | This file provides firmware functions to manage the following functionalities of the Power Controller (PWR) peripheral: |
| stm32f4xx_rcc.c | This file provides firmware functions to manage the following functionalities of the Reset and clock control (RCC) peripheral: |
| stm32f4xx_rng.c | This file provides firmware functions to manage the following functionalities of the Random Number Generator (RNG) peripheral: |
| stm32f4xx_rtc.c | This file provides firmware functions to manage the following functionalities of the Real-Time Clock (RTC) peripheral: |
| stm32f4xx_sdio.c | This file provides firmware functions to manage the following functionalities of the Secure digital input/output interface (SDIO) peripheral: |
| stm32f4xx_spi.c | This file provides firmware functions to manage the following functionalities of the Serial peripheral interface (SPI): |
| stm32f4xx_syscfg.c | This file provides firmware functions to manage the SYSCFG peripheral |
| stm32f4xx_tim.c | This file provides firmware functions to manage the following functionalities of the TIM peripheral: |
| stm32f4xx_usart.c | This file provides firmware functions to manage the following functionalities of the Universal synchronous asynchronous receiver transmitter (USART): |
| stm32f4xx_wwdg.c | This file provides firmware functions to manage the following functionalities of the Window watchdog (WWDG) peripheral: |
1.8.10 
